TouranPassion

I want to add a screen also. Kufatec sells a OEM RSE kit, but it is very expensive. I believe I can build a setup for <$250 (incl screen). I haven't done it yet but this is what it looks like it will take -

VW parts -
7M0 937 711 - 26 pin connector housing (3B0 919 754 will work also, one is cheaper than the other and the only difference is the color of the plastic)
3x 000 979 010 repair wires, this will get you 6 total terminals, 1 each for R (pin 21), G (pin 8), B (pin 20), RGB Ground (pin 19), Sync (pin 7), Sync Ground (pin 6)
2x 000 979 010 repair wires if you want to use the audio out as well, you need 3 terminals, 1 each for R+ (pin 5), L+ (pin 18), NF- (pin 17)

Cabling -
I plan on using a 6 conductor shielded wire to run the video from the back of the 510 to under the passenger seat. If you want audio as well you would need another 3 conductor shielded wire for that. Ground the shields on one end of the wires to the car chassis or the 510 itself.

Video signal -
(This is really the only thing holding me back now) - I believe the video out of the RNS-510 is RGBs (RGB + Sync) at 15kHz. I've not found a automotive LCD screen that will take that as an input. So it looks like you will need a signal converter to convert the signal to composite or s-video. Something like this should work -

http://www.ambery.com/rgrgtotvcosc.html

Screen -
Add the screen(s) of your choice

mougwai a écrit :Cool

Ce qui m'interesserais de savoir, c'est si le RNS gère le Dual Zone.

En gros, mettre un DVD video sur les écrans externes pour les enfants à l'arrière, et devant, utiliser le HDD pour lire les mp3

Évidement :
-Son à l'arrière sur DVD video,
-Son à l'avant sur le HDD mp3.

Ça serait excellent 8)